18-CHANNEL ACTUATOR
This module is designed for high power AC/DC circuits commutation. Applicable for light, power sockets, for control of fan coil units, locks, blinds/gates.
Features
- Control of a wide range of devices:
- Lights
- NC/NO heating valves
- Blinds
- 1 or 2-pole gates
- 1 or 2-pole valves
- NC/NO locks
- Fan coil units
- Relays with AgSnO2 contacts rated for 16A continuous load and 120A 20ms inrush current
- Low noise relay switching
- Built-in logical unit
- Plug and play feature
- Regular software updates
CAUTION! All work related to the installation, connection, setting up, service and support must be carried out by qualified personnel with sufficient skills and experience in working with electrical equipment. To avoid the risk of fire, electric shock, damage to the system and/or personal injury, the system installation and assembly must be performed in accordance with the instructions listed below:
- all connectivity work must be carried out with the power turned OFF;
- use appropriate tools and personal protection against electric shock;
- do not use damaged cables, wires and connectors;
- avoid folding the cables and wires;
- do not apply excessive force to the wires by kinking or pressing them too hard: the inner conductors of the cables and wires may get stripped or damaged;
- do not use the power socket with poor contacts to connect;
- do not exceed the load limit parameters specified in the manual;
- the supply conductors wire section is subject to the specifications for current density limit, insulation type and wire material. Light section can result in cable overheating and fire.
When the power is on, NEVER:
- connect/disconnect the connectors;
- open modules and sensors.
Overview
Example of connection
Module dimensions
Module parameters
| Parameter name | Value |
|---|---|
| Output channels qty | 18 |
| Input voltage | 0-250V |
| Current type | AC/DC |
| Max load per channel | 16A |
| Power supply | 18 … 27.5 V DC from CAN |
| Max current(24V) | 315 mA |
|
Permissible section of power supply cable to connect in socket: single-conductor cable multiple-conductor cable tipped multiple-conductor cable |
0.5 … 4mm2 0.5 … 4mm2 0.5 … 2.5mm2 |
| Bus type | CAN (4-wire) |
| Equipment installation type | DIN rail (EN 60715) |
| Case material | ABS |
| Protection | IP40 |
| Temperature range | -10 … +50 °C |
| Size | 9U, 162x86x60 mm |
| Weight | 475 g |
Connectivity recommendations
In order to protect the actuator and loads connected to it, installing a circuit breaker is recommended. The nominal value of the circuit breaker should be calculated based on the maximum total load of connected devices and at the same time should not significantly exceed the maximum permissible characteristics of the actuator. Depending on the requirements, you can use one circuit breaker for one actuator (it is recommended) or one circuit breaker per each group of connected loads, or, if necessary, a separate circuit breaker can be installed for each load.
Connection of actuators
Caution: Before applying power to the module, you must properly configure the outputs in the application. The contacts configured incorrectly can lead to simultaneous power supply to both channels, resulting in the module failure and/or failure of the equipment connected to it, and even a fire. If free (unused) channels remain in a given group after a curtain/jalousie/shutter actuator with low-voltage control or gate actuator has been connected to it, these channels need to be left unused. (Do not connect other devices to them!)Um das gewünschte Produkt zu kaufen, müssen Sie es bestellen. Es gibt mehrere Szenarien, wie dies geschehen kann.
- Wählen Sie das gewünschte Produkt aus und klicken Sie auf die Schaltfläche "Bestellen". Füllen Sie bei der Bestellung das Formular aus. Geben Sie Informationen in die Felder ein: vollständiger Name, Telefonnummer und E-Mail. Dann wird der Manager Sie zurückrufen, um Ihre Zustimmung zum Kauf zu bestätigen.
- Wählen Sie das gewünschte Produkt aus und klicken Sie auf die Schaltfläche "In den Einkaufswagen". Gehen Sie dann zum Warenkorb und klicken Sie auf „Zur Kasse“. Füllen Sie anschließend das Formular mit Kontaktdaten aus und senden Sie den Antrag ab. Der Manager wird sich für weitere Gespräche mit Ihnen in Verbindung setzen.
- Gehen Sie zur Produktkarte und klicken Sie auf "Mit einem Klick kaufen". Nach dem Klicken müssen Sie das Formular ausfüllen und den Antrag absenden. Der Manager wird sich für weitere Gespräche mit Ihnen in Verbindung setzen.
Wir arbeiten mit natürlichen und juristischen Personen zusammen. Und wir bieten zwei Zahlungsmöglichkeiten an.
- Bargeld. Sie unterschreiben die Versandpapiere, bezahlen bar, erhalten die Ware und einen Scheck.
- Bargeldlose Zahlung. Wir akzeptieren Visa und MasterCard. Für Kurierlieferung verfügbar.
Wir können Ihre Bestellung mit unseren eigenen Ressourcen liefern, sofern Sie sich in der Stadt befinden. Oder über 4 Lieferoptionen:
- Lieferung per Kurier. Die Kurierzustellung funktioniert von 9:00 bis 19:00 Uhr. Wenn die Ware im Lager eintrifft, wird sich der Kurierdienst mit Ihnen in Verbindung setzen, um die Details zu klären. Der Spezialist bietet an, eine günstige Lieferzeit zu wählen und die Adresse anzugeben.
- Abholung im Geschäft. Um eine Bestellung zu erhalten, wenden Sie sich an den Mitarbeiter im Kassenbereich und geben Sie die Nummer an.
- Wir kooperieren mit Paketschließfächern. Haltbarkeit - 3 Tage.
- Wir bieten Postzustellung über die russische Post. Wenn die Bestellung in der Filiale eintrifft, wird eine Benachrichtigung über das Paket an Ihre Adresse gesendet. Sie können die Box erst nach Bezahlung der Bestellung selbst öffnen.
Eine zusätzliche Registerkarte zum Posten von Informationen zu Produkten, Lieferungen oder anderen wichtigen Inhalten. Es hilft Ihnen, die Fragen des Käufers zu beantworten und seine Zweifel am Kauf zu zerstreuen. Verwenden Sie es nach eigenem Ermessen.
Sie können es entfernen oder zurückgeben, indem Sie ein Kontrollkästchen in den Komponenteneinstellungen ändern. Sehr bequem.